DW-FPS-2C Splice Protection Sleeves for use with mass/ribbon (2-12 fiber) splicing; 40mm length with glass ceramic strength member. fusion splice protection sleeves are designed to meet or exceed Telcordia Standard TA-NWT-001380. Designed for durability and reliability, the sleeves are constructed with an inner EVA meltable adhesive tube, and a polyolefin heat shrink outer tube. The strength member within the sleeve is made of tempered stainless steel with rounded and polished edges. The tubes are clear to allow viewing the color of the fiber after splicing. The entire assembly is heat bonded to ensure that all members maintain perfect alignment during shipping, handling, and the shrinking process for the best in optical fiber protection.
Properties
Test Method
Typical Data
Tensile Strength（MPa）
ASTM D 2671
≥18Mpa
Ultimate Elongation (%)
ASTM D 2671
700%
Density (g/cm2)
ISO R1183D
0.94 g/cm2
Dielectric Strength (KV/mm)
IEC 243
20KV/mm
Dielectric Constant
IEC 243
2.5max
Longitudinal Change (%)
ASTM D 2671
±5%
Provides Maximum Lasting Protection of Fiber for Splicing in Any Application
Variety of Single and Multi-Fiber Sleeves
Durable Tempered Stainless Steel Reinforcement Rods with Rounded and Polished Edges
Exceed Telcordia Standard TA-NWT-001380
Outer Tube Meets SAE AMS-DTL-23053/5 Class 2
Inner EVA Meltable Adhesive Tube
Full Length Strength Member for Total Fiber Support
Close Dimensional Tolerances
Heat Bonded Assembly
Fungus Resistant
Fusion splice protection sleeves are designed to meet or exceed Telcordia Standard TA-NWT-001380. Designed for durability and reliability, the sleeves are constructed with an inner EVA meltable adhesive tube, and a polyolefin heat shrink outer tube. The strength member within the sleeve is made of tempered stainless steel with rounded and polished edges. The tubes are clear to allow viewing the color of the fiber after splicing. The entire assembly is heat bonded to ensure that all members maintain perfect alignment during shipping, handling, and the shrinking process for the best in optical fiber protection.
Fusion splice protection sleeves are designed to meet or exceed Telcordia Standard TA-NWT-001380. Designed for durability and reliability, the sleeves are constructed with an inner EVA meltable adhesive tube, and a polyolefin heat shrink outer tube. The strength member within the sleeve is made of tempered stainless steel with rounded and polished edges. The tubes are clear to allow viewing the color of the fiber after splicing. The entire assembly is heat bonded to ensure that all members maintain perfect alignment during shipping, handling, and the shrinking process for the best in optical fiber protection.
